While the machine is in Fax/Scan mode, the indicator on the key lights up in green.Ģ Before using the Network Scan/Fax/Network Fax functionsĢ.2.1 Available operations with Network scan functionĢ.2.2 Available operations with fax functionĢ.2.3 Available operations with Network functionģ.2.2 Difference of screen display with/without optional devicesģ.2.3 Display and operation of Left panelĬheck Job - Check Job Settings - Destination SettingsĬheck Job - Check Job Settings - Scan SettingsĬheck Job - Check Job Settings - Original SettingsĬheck Job - Check Job Settings - Communication SettingsĬheck Job - Check Job Settings - Check E-Mail SettingsĤ.1.1 Environment and device requirements For details, refer to the 'User's Guide '. While the machine is in User Box mode, the indicator on the key lights up in green. Use to adjust the brightness of the touch panel. Press this key to log off from the machine as well. If user authentication and account track settings have been applied, press this key after entering the user name and password (for user authentication) or the account name and password (for account track) in order to use this machine. Press to display the screen for configuring settings for user accessibility functions. If you use PageScope Authentication Manager for authentication, the Enlarge Display screen is not available.

From this screen, you can view descriptions of the various functions and details of operations. Use to enter the number of copies to be produced, Use to enter the zoom ratio. Press to erase a value (such as the number of copies, a zoom ratio, or a size) entered using the keypad. Lights up in blue when data is being printed. When a job is temporarily stopped, press this key to restart the job.įlashes in blue while a print job is being received. If the indicator on the key lights up in orange, scan operation cannot be started. When this machine is ready to begin a scan operation, the indicator on the key lights up in blue. You can check the finishing state on the touch panel by pressing this key before scanning or copying. Press to print a single proof copy to be checked before printing a large number of copies. Pressing the key during scanning temporarily stops the scan operation. To cancel Interrupt mode, press the key again.

While the machine is in Interrupt mode, the indicator on the key lights up in green and the message 'Now in Interrupt mode.' appears on the touch panel. Press to clear all settings (except programmed settings) entered using the control panel and touch panel. Press to display the Utility screen and the Meter Count screen. 12 Data indicator 13 (Clear) 14 Keypad 15 16 17 18

Bizhub c652 utility